Thanks: 0
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: Home Made Thickness Planer
-
8th May 2012, 09:37 AM #16New Member
- Join Date
- May 2012
- Location
- Howlong NSW
- Posts
- 1
homemade planer thicknesser.
I have wondered about this myself, and like most of you cringe at the thought of losing a finger or two, but then I thought that as long as the end result was a nice flat, clean, level piece of timber, it wouldnt really matter if it took a while to achieve (Within reason) so I started drawing up a frame with runners/slides running longitudinal, with an additional frame on top that slides laterally and working out a way to mount my Makita planer into the top frame. I know I can make this work, but as yet havent actually physically started the project. Worth a thought I reckon. Otherwise just take the timber down to your local joiner and pay them to do it for you....nice to be able to do it yourself though. Pete!
-
28th November 2016, 11:06 PM #17New Member
- Join Date
- Nov 2016
- Location
- Northampton
- Age
- 66
- Posts
- 1
Hi All
I built a combination planer with a inline wide belt sander in 1995. Here is a link:DIY Woodworking Machines
I had alot of fun designing and building that machine.
Regards Barry
OpenMachineView.jpg
Similar Threads
-
Home Made Dyes
By peter in forum FINISHINGReplies: 1Last Post: 9th October 2002, 08:24 PM