Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2013
    Location
    Sydney
    Posts
    74

    Default Dying timber with food colouring to imitate Dymondwood

    Has anyone out there had success with dye dipping or staining wood with Food colouring? I am looking at colour dying turned laminated plywood to add a different level of effect. I am turning some test pieces to see the result, pics to follow.

  2. #2
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    I've never tried it but some food colourings are not very lightfast. Result may be short lived.
    Apologies for unnoticed autocomplete errors.

  3. #3
    Join Date
    Aug 2015
    Location
    Newcastle
    Posts
    53

    Default

    Probably better off using a proper pigment, which one you choose will depend on what you bond the sheets with and possibly the type of finishing coat used.

    Createx Pure Pigment Colors™

  4. #4
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    596

    Default

    Not all pigments last. Many are what are called "fugitive". It is very likely that food colourings are amongst those. In addition to those Ubernoob shows above (good post BTW) check out those from UBeaut and also "rare earth" coloured granular pigments from eBay and elsewhere.

  5. #5
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    385

    Default

    Dyeing veneers is a hit and miss affair for the DIYer, even more so with ply (or larger sections of wood), been there done that. I guess if you have access to pressure pots, or vacuum stabilisation gear it will be a different story. The other things to consider is that the extractives in the timber do funny things to the dye and final colour produced, and then there is the lightfastness of the dye. I have used various commercially dyed veneers and reconstituted veneers which hold their colour well. Finding thicker veneers is now like finding hens teeth. The available thin veneers won't produce the effect of Dymondwood unless you stack multiple layers, of thin veneer for each colour band, and that quickly becomes a very expensive exercise for anything other than very small projects.

    I have used UBeaut's dyes with mixed success, yellows are difficult, greens & black offer best results, red was good. Mostly they have held their colour well other than the yellow, but be mindful that PVA glues will blend colours on the joint line. I have achieved best results with polyurethane glues.

    ps - repeated from your other post
    Mobyturns

    In An Instant Your Life CanChange Forever

Similar Threads

  1. 'Food safe' filling of recycled timber?
    By bigred74 in forum FINISHING
    Replies: 6
    Last Post: 11th November 2009, 01:10 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •