Results 1 to 12 of 12
Thread: what is this timber
-
10th September 2016, 10:18 PM #1
what is this timber
Not sure where to put this. But I have been asked to identify the timber in this side board. As far as I know it now resides in Queensland where it was made sometime a go.
Inspiration exists, but it has to find you working. — Pablo Picasso
-
11th September 2016, 05:45 AM #2Senior Member
- Join Date
- May 2009
- Location
- Somerset, UK
- Posts
- 0
That end panel & drawer fronts looks a lot like a Yew (Taxus baccata L. [Taxaceae].
MarkWhat you say & what people hear are not always the same thing.
http://www.remark.me.uk/
-
11th September 2016, 08:29 AM #3
Looks like old pine to me, maybe cypress.
Does it have a smell inside the draws?Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
11th September 2016, 10:09 AM #4
Additional images, looks very familiar, no smell other than musty.
Inspiration exists, but it has to find you working. — Pablo Picasso
-
12th September 2016, 08:02 PM #5GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 0
I am not too sure about the cabinet but the draw side has been replaced at some time in the recent past and is a piece of merranti. the rest could be almost anything in the photo you can see many different timbers in there so difficult to say in a photo.
regards Rod.Rod Gilbert.
-
12th September 2016, 09:16 PM #6
Looks like a peppercorn slab I have.
If you never made a mistake, you never made anything!
-
19th September 2016, 05:22 PM #7GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 510
Philippine Mahogany. These replicas are made in the Philippines.
-
25th September 2016, 09:09 PM #8
+1 for the Meranti drawer side and +1 for the Cypress board up the side. (Why would you use a slab with such a distinctive difference in heartwood/sapwood?) What a hodge-podge of timbers! Rustynail's suggestion of Mahogany rings true for the first of the extra photos; it reminds me of a Cedar (White?) and our early colonists used Red Cedar as a substitute for the Mahogany as used in stately rooms and houses back in old Blighty.
Craig
-
26th September 2016, 09:25 AM #9
Mackay Cedar?
-
26th September 2016, 10:15 AM #10GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 596
Being made in in Queensland gives us some good clues. The side board does look like Cypress Pine, but Cypress is not normally that wide, even when cut bark to bark as that one. I agree with wheelinaround that it looks like old Mackay Cedar, which although very bright when new does fade to the same mellow colours as Cypress and usually comes in wider boards.
-
26th September 2016, 01:03 PM #11GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 510
These units come up at auction on a regular basis. A mob at Homebush NSW used to import them.
They came in unfinished and are sold in the raw or stained and polished. That one would have been sold in the raw, as the stain used is dark to cover knots and sapwood light colour.
The mahogany used is low grade and ringing wet. Check for shrinkage gaps.
-
22nd July 2017, 07:09 PM #12Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 72
No idea but -pics 1,3,4 look different to 3 -considerably. But seems to be a slide out surface so probably was just handy at the time.
Similar Threads
-
Finishes on open grained timber versus closed grain timber
By Pauls321 in forum FINISHINGReplies: 5Last Post: 15th November 2012, 05:35 PM
Bookmarks