![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Some tags for Vann
-
1st September 2016, 12:49 AM #1
Some tags for Vann
I visited an old joinery up Northern Rivers way curtesy of Sean a mate from way back.
They were line shaft before WW11 but then converted to the modern individually powered kit.
Will just put the Waddies up now there are a few others of interest also that will appear later.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
1st September 2016, 12:56 AM #2
Here's a few more.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
1st September 2016, 01:06 AM #3
The bandsaw had JB cast on the top wheel.
Premo sliding carriage saw and is this a Sparrow jointer?
Sean is pretty laid back.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
1st September 2016, 09:59 AM #4
You been out scrounging again Henry? Just over the boarder so close but so far
-
1st September 2016, 11:15 AM #5
-
1st September 2016, 08:14 PM #6
What I wouldn't do to acquire that J.A.Fay wood lathe.
I'd be happy with Just the head, tail stock and stepped pulleys would be fine.
Great assortment of machines, thanks for showing Henry !
Melbourne Matty.