![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
29th April 2016, 11:06 PM #1
New Member
- Join Date
- Jun 2009
- Location
- West Aust
- Posts
- 4
Metric and Imp Bolts, Thread sizes and torques
Hi all
This is a printable double sided Bolt Drill Thread Chart for the workshop. Laminate it.
The torques are based on standard bolt tensions for reusing bolts.
Important for the THREAD PITCH INDICATOR on the side.
If you print the chart measure the 1mm thread form with an accurate rule to make sure the printer is not distorting the thread pitch forms.
Use the peak of the bolt to the peak of the thread forms to identify bolt threads pitch. (It is not a thread gauge so don't try to use like a thread gauge)
TAPPING DRILL & Torque Con Chart.pdf
Regards moorebrm
-
31st August 2016, 09:24 AM #2
Senior Member
- Join Date
- Sep 2011
- Location
- Northern Beaches, Sydney
- Age
- 68
- Posts
- 298
Very handy. Thanks Barry.
Stewie