Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2015
    Location
    wa
    Age
    61
    Posts
    7

    Default Help needed about water seeping thrue brickwork mortar along footing in garage

    Hello all

    I need advice on how to fix water seeping in via the mortar at the very bottom of the brickwork to footing only in one corner my garage

    We recently purchased this house, well before my accident, but as I was removing old shelving to make way for cabinet carcass foot,
    I notice what seem to be no more gaps old type selastic calking in the bottom corner and a little water not much but enough to worry me, obviously put there by previous owner when they put up chipboard box shelving, witch was falling apart and I now know why, it fell apart. The foot box of the Cabinet carcass is all treated pine but that wont stop it from rotting and since I know little about Brickwork and mortar
    anyway I need advice and help please.

    What would be my best approach to fix this problem before it becomes a big problem.

    Should I remove this calking and Will I need to re-mortar the area at the footing where the brick meets concrete
    or should I just get a Brickie to have a look and fix it, out of all the people I know none are brickies.
    How long would I need to let it dry out if needed before applying sealer
    What I have done so far is shoveled all the dirt and sand along the concrete footing outside wall and made a make shift soak well for now.
    Would Bondall Bondcrete be an adequate sealers as I have a tub sitting in the garden shed that's never been open and its still liquefied

    I use the Bondall on MDF It works very well to seal it, Oddly enough I learned that from a party hire mob that used it on tables they made out
    of MDF. I am not sure if its good enough for mortar or just to apply over existing mortar it still very solid when I scrape it a bit with old screwdriver to see if it just crumbled but it dint

    All Advice would be very much appreciated before mounting the cabinets in that corner I would like to stop the seepage if possible
    and again It's not rising dampness there was and actual small puddle of water after all the the recent rain here in W.A.

    And for any eastern states member in the floods there I hope you are all safe and well please inform me if any
    Banks or other businesses taking relief donations for me to contribute to

    Kind Regard

    Panda

  2. #2
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    78
    Posts
    4,213

    Default

    Bondcrete was designed for concrete. Look it up on the web for mixing ratios and seal the outside.
    If it still leaks, seal the inside.
    You will probably get more info on Renovate forums

  3. #3
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    Bondcrete is not suitable as a sealer for areas that will be wet for extended periods. Provided you can organise effective drainage so that water does not pool outside the wall at the problem area you can probably get away with one of the paint on acrylic type sealers applied to the outside of the wall, the type they use for shower recesses. There is no point applying sealers to the inside of the wall, you have to prevent the water seeping in to the wall in the first place. Ensure the wall is totally dry before painting with the sealer. If you want to build up soil next to the wall again seal a piece of plastic sheet at what will be your finished ground level and run it down the wall to where you have installed your drainage below the inside floor level.

    If you're still unsure send a PM to RWBuild, he'll be able to sort it out for you, very helpful fella.

    Hope this helps. Cheers, David.

  4. #4
    Join Date
    Nov 2006
    Location
    Melbourne
    Age
    65
    Posts
    20

    Default

    You need to determine where the water is coming from. Does your gutter leak? Is the gardenbed built up too high? Is there a leaking pipe?

  5. #5
    Join Date
    Jan 2001
    Location
    Langwarrin, Victoria, Australia
    Age
    56
    Posts
    31

    Default Help needed about water seeping thrue brickwork mortar along footing in garage

    I am with termimonster on this one ... If possible solve the problem at its source. As far a sealant, I could also suggest a pond sealant (similar to shower recess sealer I guess).

    Not sure what it's like over there ... But ironically ... Wet spots will attract termites too !

    And good luck.
    Glenn Visca

  6. #6
    Join Date
    Sep 2015
    Location
    wa
    Age
    61
    Posts
    7

    Default

    Thank you all for the advice.
    What I'll do, is take the make shift soak well out and redo it nice and proper with thick black plastic liner up the wall as mentioned.

    And while I was in the garden shed looking for the paint I found some left over 2 pack pool paint with sealer added sealer for concrete pools
    it dries up like hard rubber so i'm hoping, if it's good for a pool it should be o for that ???

    As for the guttering, new gutters were installed last summer with the deep box type and after this winter
    we are looking at re-mortar the tile roof. There is no garden bed
    just a approx. 1 meter gap from the wall to the fence and I don't know why there was a sheet of hardy board at each end of the garage
    but i had to dig one out to get access to the wall. And decent seize area to it's the first things I found was some extra roof tiles pavers old hardy board but
    since they were berried I think I will call the asbestos mob before doing anything else, the one I dug out is painted and no cracks, the ones that are berried are broken.

    And as for the dirt and sand yes it was about a foot over the base bricks.

    And Termites thanks you for reminding me of those little F.....rs totally forgot about them

    Anyway a few delays in the plans and still happy I found out before any big damage

    so Thanks guys and I''l let you know how it went when its dried up and sealed cuz I'll stand there with the hose on it for a while just in case

    Regards
    Panda

  7. #7
    Join Date
    Jan 2001
    Location
    Langwarrin, Victoria, Australia
    Age
    56
    Posts
    31

    Default

    Good luck Panda
    Glenn Visca

  8. #8
    Join Date
    Jan 2009
    Location
    Brisbane
    Posts
    0

    Default

    It needs to be sealed from the outside as others have said. My take would be to excavate to about 150mm below the floor height. clean and dry the area. Apply a bituminous sealer, 3 heavy coats. Line this with a piece of corflute, real estate signs are a good source. Then backfill with 30mm gravel.

    Failure to stop the water from getting to the house will guarantee a poor result.

    Cheers
    Bevan
    There ain't no devil, it's just god when he's drunk!!

    Tom Waits

  9. #9
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    596

    Default

    As others have said, prevention is better than cure so if you can remove the soil and water from the outside of the wall, and fit a drain so that no water pools there - then your problem is solved, no sealer necessary. If there will always be water near the outside of the wall but you can seal it then there are lots of sealers available.

    I have a building - filled concrete block - built into the earth. I solved the problem with a Zinsser product, a white paint sealer. It prevents all water from coming through, so I have found a sealant that works on the inside. if you are interested, or need such a product I can look up the label details.

  10. #10
    Join Date
    Sep 2015
    Location
    wa
    Age
    61
    Posts
    7

    Default

    Well there a new plan afoot now

    And I got the impression my wife hated the Idea but its suit me very well
    Now for the time being until the weather settles here I will leave my make shift soak well there

    but I have been dragging my dust extractor in and out of the garage every time
    and with the such a small work area. well I found a nice a space for it to live on it's own
    granted its more work since I cant even get the smallest of diggers in there to get all the sand out and crap
    but I do reckon if it dries up a bit in my area there should be a small garden shed type for the dusty

    In the actual garden there are parts of an old cool room I pick up at our big roadside rubbish day
    and there's More than panels to make a shed insulated to it should dampen the noise my neighbor love so much

    And the other extra bit of work will be to convert dusty from a 5 inch to a six inch inlet
    and the best thing about all of it I don't even need to smash a hole in the bricks, the wall itself goes up ten feet after that
    A FEW PANEL OF CEMENT SHEETS TYPE STUFF AN a sheet of laser-light now guess where the hole will be for the PVC

    my only problem was the access for digging and leveling the space out was those bloody date palms that drop the seed in pool
    and get those nice black spots in the pool and this is where my old girl had a nag well I think she was yelling out something
    but with all the noise I was making I could only see her lips move and her eyes stabbing me before she went to work,
    I had to cut those F...g date palms out of my way, to get the perfect wheelchair access to the area.
    I cut the bastards down today ALL 4 OF THEM SO WHILE SHE WAS GIVING A NAG ABOUT THE TREES
    i WAS SMILING MY OFF ALL THE WAY TO THE TIP
    .
    AND i WILL STILL HAVE SPACE THERE FOR DON'T KNOW JUST YET BUT I am SURE IT WILL ONLY TAKE ME A DA OR SO TO GET
    OLD GREY MATTER Going
    SO TO ALL thank FOR THE ADVICE

    Best Regards
    Panda

Similar Threads

  1. Replies: 0
    Last Post: 16th July 2009, 10:10 AM
  2. Cleaning mortar stains from brickwork
    By Reno RSS Feed in forum BRICKWORK
    Replies: 0
    Last Post: 5th April 2009, 03:00 AM
  3. Cleaning mortar stains from brickwork
    By ubeaut in forum BRICKWORK
    Replies: 0
    Last Post: 26th January 2009, 10:00 PM
  4. Cleaning lime mortar from brickwork
    By ubeaut in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:18 AM
  5. brickwork advice needed
    By scubabob in forum BRICKWORK
    Replies: 5
    Last Post: 4th July 2007, 06:15 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •