So I've put the door in, plastered, but still need to finish properly. I popped a piece of architrave on the door frame and realised there isn't enough width for it before the corner. The door is to a linen press with the adjacent existing (not modified) door opening into the bathroom.
A sketch tells lots of words:
image.jpeg
Above is roughly the layout with the blue being the architrave and black being the walls etc. the arc is only about 5mm to wide. Not sure wether it would be better to cut the red line, or the green line for the best finish. Thoughts appreciated.

its times like these you realise you are an amateur and didn't pick the door position too well.
Attached Images




Read and reply to the full thread at RenovateForum.com....