Results 1 to 5 of 5
  1. #1
    Join Date
    Feb 2016
    Location
    Golden Grove,South Australia
    Age
    71
    Posts
    19

    Default Shellac v Wood Conditioner

    Hi. I am doing a small project involving pine panels about 10mm thick.

    I have read that before staining it is best to coat BOTH back and front and sides to seal the wood from moisture entry to prevent any possibility of cupping/warping before staining.

    Some say use a wood conditioner, others say 1:1 shellac.

    I am confused which one I should use. I do understand both will help reduce blotching in softwoods when staining.

    Look forward to any help here.

    Cheers
    Chris

  2. #2
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    I certainly not able to comment on Wood Conditioner as I have never use it. I do have a thought as that would be what are the components of wood conditioner?

    I have used a thinned out mixture of Shellac to prevent blotching in pine and even used it on the end grain. It has given me good results.

  3. #3
    Join Date
    Feb 2016
    Location
    Golden Grove,South Australia
    Age
    71
    Posts
    19

    Default

    Thanks for your reply Christos

    I have read that a weak mixture of shellac does does work for some (1/2 pound). I did purchase a wood conditioner in the end as I needed to get started on something. I purchased Feast Watson Timber Primer.

    Timber Primer | Wood Preserver, For Priming New Timber

    A penetrating wood preserver for priming new timber prior to applying a stain or varnish. Use on soft, porous timber such as pine to ensure that stains and top coats absorb evenly. It has added water repellency.

    and if not happy I will give the Shellac a go.

    Cheers
    Chris

  4. #4
    Join Date
    Feb 2006
    Location
    Lindfield N.S.W.
    Age
    63
    Posts
    1,644

    Default

    Looks to me like a very thin oil-based varnish. It might work, but I would try thin shellac first because anything will go over shellac, but sometimes all you can do with other materials is sand down to bare wood.

    Of course you are going to try this out on offcuts and not on the project......
    Cheers

    Jeremy
    If it were done when 'tis done, then 'twere well it were done quickly

  5. #5
    Join Date
    Feb 2016
    Location
    Golden Grove,South Australia
    Age
    71
    Posts
    19

    Default

    Hi Jeremy

    Thanks for your post.

    I will certainly try on some test pieces first.

    Very new to woodworking so every step is a learning curve.

    Cheers
    Chris

Similar Threads

  1. Wood Conditioner
    By audisadi in forum FINISHING
    Replies: 8
    Last Post: 16th May 2012, 08:12 PM
  2. Shellac Pre-stain conditioner?
    By Ian Butler in forum FINISHING
    Replies: 2
    Last Post: 29th May 2010, 12:35 PM
  3. alternative to varathane wood conditioner?
    By mic-d in forum FINISHING
    Replies: 4
    Last Post: 9th April 2009, 09:49 AM
  4. Need help: Shellac over wood stain
    By daveh in forum FINISHING
    Replies: 6
    Last Post: 4th March 2004, 12:17 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •