Results 1 to 6 of 6
-
2nd February 2016, 08:54 PM #1New Member
- Join Date
- Feb 2016
- Location
- Perth, Australia
- Age
- 54
- Posts
- 1
Scratch resistant coatings for jarrah
Please. Desperately need advice. Have made jarrah window sills for the home. Dogs scratch them too easily when Roos sit outside and tease them or somebody arrives. Is there a really tough scratch resistant coating I can use. Currently they have an oil based stain on them. Can't remove them as they are sealed in place. Can be gloss finish but prefer satin. And don't want to loose the natural grain look. If anything. Would like to enhance it. Can anyone please give some advice of what I can do apart from getting rid of the dogs.
-
2nd February 2016, 10:20 PM #2
There's nothing that will really provide the level of protection from scratches you want as well as retaining natural grain. I'd try a floor polyurethane, but having said that, I know it will get scratched eventually anyway.
You really need something like tile to give you a durable, hard to scratch surface.
Or a sacrificial sill piece made of the same jarrah, that you remove/replace every X months.
-
2nd February 2016, 10:38 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
No finish on wood is going to prevent that sort of dog damage.
We have two dogs and jarrah floorboards with hard two pack epoxy finish and we have resigned our selves to a scratched floor.
Suggest you might try training the dogs. One of those electronic collars might work.
-
2nd February 2016, 10:49 PM #4Senior Member
- Join Date
- Aug 2015
- Location
- Newcastle
- Posts
- 53
First off, I don't know if this will work as I have not tried it on wood, if the wood deforms under the coating it may fail.........not sure.
I have however used it on some car wheels and on other metal parts and the shine it gets is pretty amazing and it is damn tough, it is a stone chip rated clear coat.
It is nasty to paint with and you should use an appropriate mask but when it dries the smell is gone, it is also a moisture cure product so you can't apply it on humid days.
GLISTEN PC
Instructions- http://ppcco.com.au/fact_sheets/pi/pi_glistenpc.pdf
-
7th February 2016, 10:04 PM #5SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 133
Could you put a protective cover over the sill - a folded piece of polycarbonate for example. Replace as needed.
-Russ
-Russell
-
7th February 2016, 10:57 PM #6
What about a repellent of some sort something dogs hate smelling ie vinegar
Similar Threads
-
Using Clear Epoxy Coatings
By RoyG in forum FINISHINGReplies: 17Last Post: 6th April 2015, 10:56 PM -
floors, coatings and heaters
By titand in forum FLOORINGReplies: 2Last Post: 12th July 2006, 11:42 PM
Bookmarks