Thanks: 0
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Hello every one
-
14th December 2015, 10:58 PM #1
New Member
- Join Date
- Dec 2015
- Location
- brisbane
- Posts
- 1
- Post Thanks / Like
Hello every one
Hello every one i do a mixture of wood work and metal the latter more as i am retuire due to a frailed back operation.i am interisted about the diskcution about the thread on the problems with the dril mill with the play in the spindle. i to have the same problems.io 2will read up a little more and then give my 2 cents worth. thank you Stanmoto.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 , 0
crowie liked this post
-
15th December 2015, 09:10 AM #2
GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 130
- Post Thanks / Like
Hi Stanmoto,
Welcome to the Forum.
I too do both woodwork and metal work in my modelmaking. I am an ex Fitter by trade. I think combining the two gives a lot of extra scope when putting something together.
There are many very talented people on this Forum only too willing to assist if you have any queries.
Again - Welcome to the forum and I hope you make many good friends
Regards
Keith
-
15th December 2015, 12:26 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
- Post Thanks / Like
Welcome to the forum.
-
15th December 2015, 12:45 PM #4
GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 408
- Post Thanks / Like
Welcome.
-
17th December 2015, 08:06 AM #5
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,893
- Post Thanks / Like
Welcome to the Forum
-
17th December 2015, 09:01 AM #6
Mildly Moderate
- Join Date
- Nov 2007
- Location
- Albury Well Just Outside
- Posts
- 2,966
- Post Thanks / Like
Welcome to the forum.
-
17th December 2015, 09:25 AM #7
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 69
- Posts
- 2,576
- Post Thanks / Like
G'Day & Welcome to a top forum "Stan".
There are a stack of members in Brisbane & S.E. Queensland plus the rest of the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
Reply With Quote
Bookmarks