Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: trolla 104 wood stove
-
3rd May 2010, 07:31 PM #1
trolla 104 wood stove
Hi all
a work mate gave me a trolla 104 (name on door) wood stove about 250 to 300mm wide and 350 to 450 mm deep all cast iron and a dancing couple on both sides,he found it on a place he bought up near coonabarabran has any one heard of this brand? i searched the yahoo search engine but couldnt find any info and thought the brains on this forum may be able to help
thanks heaps
greg
-
20th May 2010, 01:19 AM #2New Member
- Join Date
- May 2010
- Location
- sydney
- Posts
- 2
trolla stove
I also found an old trolla stove 820 with carved deers on the doors and a figure on the back inside wall of a girl riding a bear.
All cast metal and very heavy. I found it while cleaning out an old abandon house near Windsor, nsw. Only thing missing was the chimley.
I also have found nothing with Trolla in differnt search engines.
They are beautiful old wood stoves and you would think there would be some information regarding them on the internet.
-
20th May 2010, 09:29 AM #3
Trolla Brug were a Norwegian company that made cast iron stoves from 1830 till 1980.
There is not a lot of info about them unless you can read Norwegian.
The old plant in Trondheim is now the headquarters for Hells Angels Norway and was recently raided in a drug bust.Those were the droids I was looking for.
https://autoblastgates.com.au
-
20th May 2010, 10:39 AM #4
thanks nc
i have to get the2 back legs brazed on as the bolts have snapped in the body and i think it would be easier than drilling the holes or if i did what type of bolt would i use normal zinc or gal or would i have to go high tensil? there is a hole at the back for the chimney and it is missing the 2 round plates for the top but being a patient bower bird i will keep snooping around the wife wants to put it in the front garden as an orniment i want to restore it and either put it in the shed or near the bbq
greg
-
20th May 2010, 01:30 PM #5
I have to say, I love the old cast iron stoves. I would restore it and use it. So any advice i give will be along those lines.
Noooooooo
Can you show us some photos of the broken bits? Might help to work out a way to repair it.
You can purchase flue kits from a plumbing supplies wholesaler like Reece
Shouldn't be too hard to have some cut from steel plate. Would be plenty of engineering places in Newcastle that could do that for you.
I presume it's these type of round platesThose were the droids I was looking for.
https://autoblastgates.com.au
-
20th May 2010, 08:15 PM #6
yes they are the plates
i will get some photos up in a day or so,i have been ticking my brain over and might put some new bolts in the back legs it sounds the simplest way to go
greg
-
26th May 2010, 10:57 PM #7New Member
- Join Date
- May 2010
- Location
- sydney
- Posts
- 2
trolla 820 cast iron stove
I have a trolla 820 cast iron stove that is complete...nice little stove that the doors slide back along the sides so I can insert the fire screen.
So bloody heavy to lift...I have to take everything off first just to make it lighter..
Wish I could find out more information about it...
On the side walls inside there is moulded picture of 2 deers and on the back wall inside is a moulded picture of a female riding a bear. So much detail has gone into it.
Cheers.
-
30th May 2010, 08:09 PM #8
here are a couple of pics of the stove the first pic shows the broken bolts on both back legs and the next pic shows the unit missing the top round plates and the flue attachment on the back
my easiest option for the legs is drill the holes out and fit new bolts for the back legs then attack the old girl with a wire wheel on a drill and then repaint in pot belly black
then get a flue kit and 2 plates for the top
-
10th November 2010, 04:22 PM #9New Member
- Join Date
- Nov 2010
- Location
- North Oregon Coast, USA
- Posts
- 1
Dear Farmboy
I do hope you still have your Trolla! They are gems. I have a Trolla 105 A, which I have used as my only heat, except for a small electric heater for an occasional warm blast in the bathroom, since my father installed it in the early 70's. He called it "Little Toot" and bought an identical (except it is enameled green, mine is cast iron black) one for their large ranch style home, when he saw how well it worked. They cut way back on need of furnace.
I live in a small beach cabin. It is less than 500 sq.feet, and completely uninsulated. Single pane windows, and single wall construction (no 2 x 4's or studs). I can be as toasty as I want downstairs, in main room, and do just fine most days upstairs too. If we get a cold, freezing snap, (we usually get about one week of cold with ice and snow) the upstairs gets chilly. Most days when it is raining and blowing (Oct through May) I do just fine.
When the power blows out, as it often does, as 100MPH storms are not that unusual, I stoke it up a bit and I cook just fine on it. Other times I often simmer a pot of beans or soup. The fire holds all night just fine if I have a bed of coals and a solid large piece. One to two cords of wood keeps the place toasty for a year.
The bad part is the baffel burned out many years ago, and we failed to keep the original for a pattern. The makeshift one just never worked too well, and stove never worked the same. I really think I was getting second burn with original baffel. It was a cast iron thing that fit on the firebrick liner.
So, other than encouraging you to restore yours for your home, please not a planter, I was hoping perhaps you could shed some light on the baffeling baffel.
I needed to talk to you about this bad enough to sort through the whole registration etc. process, which is the first time I have registered for anything like this, (wasn't easy for a non techie like me) so I just really hope you get this! I would love to know how it goes.
-
23rd November 2010, 11:06 AM #10Deceased
- Join Date
- Aug 2008
- Location
- Bundaberg Queensland.
- Age
- 76
- Posts
- 267
Getting a wood heater has been on our mind's for a while, but i keep seeing these little stoves and wonder if they might be a better way to go,the one thing that has S W A M B O a little worried is weather it will smoke up the inside of the house
-
14th December 2015, 11:13 AM #11Intermediate Member
- Join Date
- Jan 2009
- Location
- Reservoir Melbourne
- Posts
- 28
I know it's been a while but I'm wondering how you went with the rebuild as I have just bought one of these and it needs some TLC
Similar Threads
-
New Gas Stove
By LegacyGT in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 8Last Post: 2nd January 2008, 09:48 AM -
Splashbacks behind gas stove
By totoblue in forum KITCHENSReplies: 4Last Post: 14th February 2006, 12:48 PM