![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Rust protecion for tools
-
5th July 2015, 11:09 PM #1
New Member
- Join Date
- Jul 2015
- Location
- North Rothbury
- Posts
- 2
Rust protecion for tools
Howdy, I'm restoring my grandfather's tools. They have a lot of surface rust, but will clean up well. I'm after suggestions and ideas to prevent future rust after I have cleaned them up. Most rust removal will be via wire brush and helped with molasses dip. Thanks In Advance. Planes, chisels, saws, marking out tools etc. Cheers, Jack.
-
5th July 2015, 11:25 PM #2
Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
Lanolin spray?
http://www.lanotec.com.au/rust-corro...ention-sprays/
I've used this on a 16th century iron coin chest..after de rusting it. I checked first with the conservators at the NGV. No problems. so it should be good for tools.
-
5th July 2015, 11:28 PM #3
CRC 3-36, Boeshield, Lanotech, vasoline, CRC Soft Seal.......
-
6th July 2015, 09:23 AM #4
New Member
- Join Date
- Jul 2015
- Location
- North Rothbury
- Posts
- 2
-
6th July 2015, 04:40 PM #5
For the woodworking tools I use G-15.
You might want to take a look at their website. http://www.australianinhibitor.com.au/page/1/home.html
-
6th July 2015, 05:18 PM #6