Rust protecion for tools

[Jacks Shed]

Howdy, I'm restoring my grandfather's tools. They have a lot of surface rust, but will clean up well. I'm after suggestions and ideas to prevent future rust after I have cleaned them up. Most rust removal will be via wire brush and helped with molasses dip. Thanks In Advance. Planes, chisels, saws, marking out tools etc. Cheers, Jack.

[astrid]

Lanolin spray?
http://www.lanotec.com.au/rust-corro...ention-sprays/

I've used this on a 16th century iron coin chest..after de rusting it. I checked first with the conservators at the NGV. No problems. so it should be good for tools.

[Master Splinter]

CRC 3-36, Boeshield, Lanotech, vasoline, CRC Soft Seal.......

[Jacks Shed]

Lanolin spray?
http://www.lanotec.com.au/rust-corro...ention-sprays/

I've used this on a 16th century iron coin chest..after de rusting it. I checked first with the conservators at the NGV. No problems. so it should be good for tools.

Thanks, i'll check it out.

[Christos]

For the woodworking tools I use G-15.

You might want to take a look at their website. http://www.australianinhibitor.com.au/page/1/home.html

[Cliff Rogers]

This subject has been covered HEAPS already.

For the woodworking tools I use G-15.

You might want to take a look at their website. http://www.australianinhibitor.com.au/page/1/home.html

Me too.