Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
3rd June 2015, 10:40 PM #16Member
- Join Date
- Jul 2014
- Location
- Alphen aan den Rijn, Netherlands
- Posts
- 67
Michael,
Thanks for the pictures, that helps a lot. I understand what you mean concerning the helix angle, and yours likely is the more practical solution.
The solution I cunjured up was to put the 90° head on the quill, and than rotate this head to the helix angle and mill on top of the blank like on a horizontal mill (clear as mud?). Since there are no angle graduations on the 90° head setting the helix angle might be a challenge though.
Peter
-
4th June 2015, 09:28 AM #17SENIOR MEMBER
- Join Date
- Jun 2011
- Location
- Australia east coast
- Age
- 71
- Posts
- 1,468