Thanks: 0
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Carbide Pin supplier
-
13th April 2015, 08:43 PM #1
New Member
- Join Date
- Oct 2010
- Location
- Bunbury
- Posts
- 6
Carbide Pin supplier
Hello,
Where can I get 6x20mm carbide pins from?
I am going to making some knurling holders.
-
13th April 2015, 08:46 PM #2
Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,298
What about blank round carbide tool bits cut to size? I think you would want a tough rather then hard grade..
Light red, the colour of choice for the discerning man.
-
13th April 2015, 10:39 PM #3
Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 80
- Posts
- 2,237
Knurling wheel pins
I assume you are going to use the pins as axles for the knurled wheels.
My suggestion would be to use off the shelf hardened dowel pins.
Ken
-
14th April 2015, 01:32 PM #4
SENIOR MEMBER
- Join Date
- Jul 2011
- Location
- Melbourne Australia
- Posts
- 1,128
Lance.
Carbi-Tool in Moorabbin list 6mm by 63mm long, round ground and polished 0 - 0.013mm tol.
Part Number is CC-6 MM X 63 MM K2O SMG. My 2009 price list had them at $5.50 + GST ea.
They could cut them to length for a charge.
http://www.carbitool.com.au/
Regards Phil.
