Results 1 to 2 of 2
Thread: wrong finish
-
12th April 2015, 08:42 PM #1New Member
- Join Date
- Apr 2015
- Location
- Perth, Australia
- Posts
- 2
wrong finish
I have done something quite silly really and have use a stain that is far to light for my needs. I have made a thin waterfall style bench for behind my couch out of pine. I have not used a gloss stain or put a finishing coat on it.
my question is this. Would I be ok to put a darker stain over the top or will I have to sand it back to bare wood?
-
12th April 2015, 08:50 PM #2SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 76
Provided it is purely a stain, water, oil or spirit based then you can just apply a darker one over the top.
If it is an all-in-one stain and varnish type you will need to sand back to bare timber again.
Similar Threads
-
HELP!! Endgrain finish gone wrong
By Dengue in forum FINISHINGReplies: 13Last Post: 18th March 2013, 01:46 PM -
Talk about wrong place at the wrong time....
By silentC in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 8Last Post: 25th October 2005, 11:51 PM
Bookmarks