Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: INCRA I-box Setup Question
-
30th March 2014, 03:23 AM #1New Member
- Join Date
- Mar 2014
- Location
- Alexandria
- Posts
- 8
INCRA I-box Setup Question
I am setting up my new Ibox. The instructions say to position the red knob on the left for a left tilting saws and on the right for a right tilting saw.
Carftsman 10" jobsite table saw.
When I think of tilt I think top pointing downward..WHATEVER....does this make any difference what side I position the red knob. i'd rather have it on the rght since I am right handed?
thanks in advance.
-
31st March 2014, 02:52 PM #2Senior Member
- Join Date
- Mar 2009
- Location
- Central Vic
- Posts
- 110
Best to go by the instructions, tilt will be from bottom to top, if you put the adjusters on the right you'll
be using your left hand for handling the timber and clamping, which is by far the most activity you'll be
doing on the i-box. also with the adjusters on the left for left tilt you only have to kiss calibrate once, if you change
out dado blades often you'll be doing it everytime for the opposite setup
my thoughts
col.
-
6th April 2015, 03:02 PM #3New Member
- Join Date
- Aug 2008
- Location
- Perth
- Posts
- 3