Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2015
    Location
    Mitchelton, Brisbane, QLD
    Posts
    4

    Default G'day from Brisbane

    Hi all,

    My name is Tim, I live on the northside of Brisbane.

    I am new to woodworking aside from the little bit I did at school, I have always loved working with wood, its got a nice and warm feel to it....

    I am looking at getting into woodworking as a hobby only, not really interested in becoming a full on salesman, just after a bit of fun. My Girlfriend has also expressed an interest in doing it which was the final push I needed to get into it......

    I am looking at buying a lathe and don't know the first thing to look for, I am looking at turning bowls, boxes, round things......I have looked at Carbatec and found they have an economy lathe for $559
    http://www.carbatec.com.au/carba-tec...dlathes_c14630

    I also found a place called Machinery House and found something very similar for $500.....
    https://www.machineryhouse.com.au/W382

    I am happy to hear peoples opinion on these lathes, but as it is something that I am new at, im not looking at buying a $2000 lathe.....Any other alternatives?

    Also where can you buy tools at a reasonable price?

    Cheers

    Tim

  2. #2
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Tim".
    There are a stack of members in Brisbane and across S.E. Queensland plus the rest of the country.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork...
    Cheers crowie

    May I suggest to add a new thread with your lathe questions in a more relevant turning subsection to gain a wider audience and thus helpful responses, sorry that I can't help more....

    On the tools side, check out the Market Place on the forum plus keep an eye out for Garage Sales, Deceased Estates and if in the country Clearance Sales...other than that, the local blokes & ladies will have to assist.....maybe another thread with the question in the hand tools and power tools subsections....

  3. #3
    Join Date
    Mar 2015
    Location
    Mitchelton, Brisbane, QLD
    Posts
    4

    Default

    Quote Originally Posted by crowie View Post
    G'Day & Welcome to a top forum "Tim".
    There are a stack of members in Brisbane and across S.E. Queensland plus the rest of the country.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork...
    Cheers crowie

    May I suggest to add a new thread with your lathe questions in a more relevant turning subsection to gain a wider audience and thus helpful responses, sorry that I can't help more....

    On the tools side, check out the Market Place on the forum plus keep an eye out for Garage Sales, Deceased Estates and if in the country Clearance Sales...other than that, the local blokes & ladies will have to assist.....maybe another thread with the question in the hand tools and power tools subsections....
    Hi Crowie,

    Thanks for that, I will post those up when I get some decent wifi and back into the office.

    I look forward to meeting a few people, and hopefully there is something along the lines of a woodoworking club or something I can get some help from.

    Cheers

    Tim

  4. #4
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    Quote Originally Posted by Coxy15 View Post
    Hi Crowie,

    Thanks for that, I will post those up when I get some decent wifi and back into the office.

    I look forward to meeting a few people, and hopefully there is something along the lines of a woodoworking club or something I can get some help from.

    Cheers

    Tim
    Tim, May I suggest you amend your address from Australia to something like Northgate, Brisbane to make it easier to hook up with local forum members..... I used Northgate as the example as that's were I grew up...cheers, crowie

    PS - I know there is a good woodwork club down at Redcliffe through one of the forum members...

  5. #5
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum Tim.

  6. #6
    Join Date
    Mar 2015
    Location
    Mitchelton, Brisbane, QLD
    Posts
    4

    Default

    Quote Originally Posted by crowie View Post
    Tim, May I suggest you amend your address from Australia to something like Northgate, Brisbane to make it easier to hook up with local forum members..... I used Northgate as the example as that's were I grew up...cheers, crowie

    PS - I know there is a good woodwork club down at Redcliffe through one of the forum members...
    I tried to change my address, but it won't let me.

    How much are the club fee's?

  7. #7
    Join Date
    Jul 2003
    Location
    Riverhills, Brisbane
    Age
    65
    Posts
    0

    Default

    Coxy15,

    Welcome to the forum.

    Did you try to reset your Location through Settings.....

    Settings (Top Right)

    then

    in the My Profile (LHS of page)

    Edit Profile

    then alter Location

  8. #8
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    Quote Originally Posted by Coxy15 View Post
    I tried to change my address, but it won't let me.

    How much are the club fee's?
    Sorry Tim, I don't know....crowie

    I did a google search Redcliffe Woodwork Guild with the following result....

    https://www.moretonbay.qld.gov.au/ap....aspx?ref=1510

    http://redcliffewoodcraft.org/

  9. #9
    Join Date
    Mar 2015
    Location
    Mitchelton, Brisbane, QLD
    Posts
    4

    Default

    Quote Originally Posted by skot View Post
    Coxy15,

    Welcome to the forum.

    Did you try to reset your Location through Settings.....

    Settings (Top Right)

    then

    in the My Profile (LHS of page)

    Edit Profile

    then alter Location
    Thanks for that, It turns out my account was temporary and was awaiting approval.

    Thanks for the help


    Quote Originally Posted by crowie View Post
    Sorry Tim, I don't know....crowie

    I did a google search Redcliffe Woodwork Guild with the following result....

    https://www.moretonbay.qld.gov.au/ap....aspx?ref=1510

    http://redcliffewoodcraft.org/

    I will have a look at that, unfortunately with my line of work, I work very odd days and it's not always predictable when I will be home.

    Tim

  10. #10
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to a top forum

  11. #11
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum.

Similar Threads

  1. G'Day from Brisbane
    By Jess1313 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 29th November 2008, 12:12 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •