![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Outfeed Table Design
-
12th March 2015, 01:23 PM #1
Outfeed Table Design
Hi WWF,
I recently upgraded my mancave from a small 12m2 number with 6ft high ceiling to a 70m2 4 metre high ceiling dream shed
As such I now have room for an Outfeed table for my cabinet saw. Does anyone have any good designs, pictures or ideas they can share?
cheers
damien
-
12th March 2015, 10:04 PM #2
Any ideas welcome
-
12th March 2015, 10:37 PM #3
just a basic table, I made mine so that it was 20mm higher at the back to break the suction of running sheets over it. I'll paste a pic tomorrow.
Check my facebook:rhbtimber
-
13th March 2015, 09:39 AM #4
I made mine with a router insert so that it can be multifunctional. It also folds down against the back for ease of movement rather than having to remove it.
I can add photos when I get home.
Here they are.
Router_table_05.jpgRouter_table_06.jpgLast edited by Treecycle; 13th March 2015 at 05:16 PM. Reason: Photos added
-
13th March 2015, 10:28 AM #5
GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 1,917
I have a Paulk workbench that I'm hoping will work as an outfeed table, if not then I'll build something like this https://www.youtube.com/watch?v=Pt6s3rzF8jg.
-
13th March 2015, 04:40 PM #6
I'm planning to build one like this from the Wood Whisperer
https://www.youtube.com/watch?v=U3Wt3R4S6dw
Similar Threads
-
Finish for MDF Top - Outfeed / Assembly Table
By Arry in forum FINISHINGReplies: 8Last Post: 21st May 2011, 10:07 PM