Results 1 to 10 of 10
Thread: Hello from Scotland
-
3rd March 2015, 10:45 AM #1
Hello from Scotland
Hi everyone, I'm posting this from Aberdeenshire in Scotland. I've spent most of my life in a rural area where I developed a lasting respect for the natural environment and trees in particular. Woodwork wasn't really one of my strengths when I was at school but that didn't discourage me, I have always had a hankering to make things with my own hands. Fast forward a few decades and I finally have sufficient resources and time to indulge myself.
Most of my work is turned (Union Graduate short bed and Scheppach DMV-200 lathes) but I also do some power carving and make the occasional piece of furniture. I'll be visiting family near Brisbane soon so I thought it was about time I introduced myself. Working with wood is a great stress reliever and I like to think that it keeps me sane, but I dare say that you will soon form your own opinions!
Cheers!
Tony
-
3rd March 2015, 12:19 PM #2
Welcome Tony from Down Under
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
3rd March 2015, 06:44 PM #3
Welcome to the forum.
I am certainly not going to suggest you come to Australia and visit the working with wood show in Brisbane BUT if you are in Brisbane at the same time who to say what might happen.
More information on this link.
http://impressiveexhibitions.com.au/...e-details.html
-
3rd March 2015, 07:58 PM #4
[QUOTE=Christos;1848145]Welcome to the forum.
I am certainly not going to suggest you come to Australia and visit the working with wood show in Brisbane BUT if you are in Brisbane at the same time who to say what might happen.
(snip the link)
]
Thanks, Christos, but sadly I'll be back home by then. I would be pleased to hear of anything happening near Brisbane in the first 10 days of April, however!
Regards,
Tony
-
4th March 2015, 10:26 AM #5GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Tony.
-
7th March 2015, 08:58 PM #6
G'Day & Welcome "to the Great South Land" & to a top forum "Tony".
There are quite a few members from UK on the forum as well as across the rest of the world..
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [work in progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers from On Top DownUnder, crowie
-
7th March 2015, 10:00 PM #7
Hi Tony, welcome to the forum and Australia. In addition to Jims "one good turn deserves another" I'll be passing through your neck of the woods a bit later in the year on a woodwork, air show, Brough and single malt self-guided tour!
flettya rock is an obsolete tool ......... until you don’t have a hammer!
-
9th March 2015, 06:57 PM #8
Thanks to all responders. I'm now in Auckland having been offline for much of the intervening period. Fletty give me a shout when you are in the area and I 'll see if there's anything I can help you with should you need it.
-
9th March 2015, 07:08 PM #9
-
13th March 2015, 06:50 AM #10
welcome to the forum.
Similar Threads
-
G`day from Scotland
By AnselmFraser in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 2nd May 2013, 01:09 AM -
G'Day from Scotland
By GBirse in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 15th August 2010, 08:42 PM -
Scotland
By bullfright in forum JOKESReplies: 5Last Post: 18th June 2010, 07:40 AM -
hello from scotland
By craig mcf in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 4Last Post: 4th March 2009, 09:02 PM
Bookmarks