Thanks: 3
Likes: 15
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Wind Turbine
-
25th February 2015, 02:19 PM #1GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
Wind Turbine
Hi guys,
Took an hour off from working on the Lion to make up something for my just turned 3 YO Grandson. He has an obsession with wind turbines. There is one on the way from his house to ours and have to stop in wonderment at it every visit - either his dad or me.
Made this out of a 3 blade plane propellor I had lying about ( I make model planes as well as trains). The centre core is made out of 25mm OD aluminium pipe. I made the top cover out of 25mm aluminium bar and araldited it in. 1/4" BSW thread and washers. Base 70 X 35 pine. Primed with white spray. Josh will love it.
Any other grandpa's with the same grandson obsession ?
Regards
Keith
Wind Turbine.jpg
-
25th February 2015, 08:11 PM #2
Now that's a beauty Keith...you sure got you priorities right with toys for the grandkids, love it and well done sir....
BUT please were are some of the photos of the planes!!
Cheers, Peter
-
26th February 2015, 09:53 AM #3
Is that the one near Breamlea? I can't think of any others around the area.
Josh should be chuffed with that one.Dallas
-
26th February 2015, 09:55 AM #4GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
Hi Crowie,
Thanks for asking about the planes. A bit embarrassed to show them - quality not that great. My first real go at modelling. It was whilst I was still working and time was the essence. Quantity more than quality - but you asked for it - here goes - (photos not in order)
Spitfire
Curtis Warhawk
P51 Mustang
Sopwith Camel
Fokker Triplane
Good to look back to see where you can improve on detail.
Best Regards
Keith
Aircraft5.jpgaircraft1.jpgAircraft2.jpgAircraft3.jpgAircraft4.jpg
-
26th February 2015, 09:56 AM #5GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
-
27th February 2015, 09:30 AM #6
-
27th February 2015, 12:56 PM #7GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
Hi Derek, I'm sure he will love it. Above the planes is a T Model Bread Van that I made.
Regards
Keith
T Model1.jpg
-
27th February 2015, 08:49 PM #8
You've been hiding your light under a train or two Keith.....
Love the model planes & that truck is tops, sir...well done.
Cheers, Peter
-
27th February 2015, 10:55 PM #9GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
Thanks Crowie,
I think you have seen my Fire Engine - A Model Ford (of course)
fe1.jpg
Josh LOVED the Wind Turbine. Had it by his side all night. It's now gone to his place (Which I intended). Will have to make another to reside here.
He also loves buses - Where do I get the time to make a bus and work on the Lion ?
Regards
Keith
-
2nd March 2015, 04:39 PM #10GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Torquay
- Posts
- 4,315
In between working on the Lion, I have made another Wind Turbine for Joshua. He can keep this at our place if he wishes. It has a bit of a twist to it. I have screwed an Emergency Services vehicle to the base. Josh (although only 3) will go onto You Tube and look up Wind Turbines and likes the one that catches fire. Well - so do I !!!
wind turbine2.jpg
Similar Threads
-
HVLP Turbine Recommendations needed.
By joez in forum FINISHINGReplies: 3Last Post: 27th March 2012, 10:26 AM -
Wind Turbine / Generator...Anyone building / built one??
By ptrott in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 16Last Post: 19th April 2008, 06:11 PM