Thanks: 0
Likes: 9
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: water buffalo horn carved fish
-
26th January 2015, 10:32 AM #1
water buffalo horn carved fish
In the process of carving a fish from water buffalo horn for a hiking pole topper
This is a new thing for me so a big learning curve
still in its crude state at the moment needs tidying up and polishing just a few photos how i started and where i am at
fish buffalo horn 001.JPG
fish buffalo horn 004.JPGbuffalo fish 001.JPGbuffalo fish 004.JPGfish 010.JPGfish horn 003.JPGfish horn 006.JPG
-
26th January 2015, 11:55 AM #2
Watching.
Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
26th January 2015, 04:46 PM #3GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,464
Looking good.
-
27th January 2015, 12:17 PM #4SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 823
Good start and very interesting design. I take it that this is a staff and that the grip will be somewhere on shaft below the fish? Did you buy the horn compressed or did you compress it your self?
-
27th January 2015, 06:46 PM #5Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 694
Different!! Watching!!!
-
28th January 2015, 08:43 AM #6
The horn was purchased like it. yes its a hikingpole should grip it a few inches below the fish