Results 1 to 4 of 4

Thread: Flai rip blade

  1. #1
    Join Date
    Oct 2007
    Location
    vic clayton
    Posts
    0

    Default Flai rip blade

    I've just fitted a Flai rip blade to my Laguna TS so far I've put about 1/2 a km through with great results. The blade cuts with great ease with just the slightest cross hatching and the occasional deeper slice due to operator error.
    the timber is a variety of Vic HW 21mm thickness.
    will be interesting to see how long it will continue as I have an estimated 15km to go.
    my usual rip blade is a Leuco on my 12" woodfast but the motor decided to stop and I need to get it fixed
    Attached Images Attached Images
    Some people are like slinkies - not really good for anything, but they
    bring a smile to your face when pushed down the stairs .

  2. #2
    Join Date
    Sep 2013
    Location
    Cherrybrook,NSW
    Posts
    36

    Default

    It looks like vic ash or tassi oak to me. How did you end up getting an estimated 15km of timber if I may ask. Is it recycled timber?

  3. #3
    Join Date
    Oct 2007
    Location
    vic clayton
    Posts
    0

    Default

    It's approx 900 lineal metres per pack which I rip into strips usually 3 or 5 strips per length and I have a few packs to go through. The packs are mixed species of vic hardwood.
    Some people are like slinkies - not really good for anything, but they
    bring a smile to your face when pushed down the stairs .

  4. #4
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    19
    Posts
    744

    Default

    flai is a good brand, I have 2 for my 12" and they are really really effective. good choice.
    Zed

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •