![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
-
11th January 2015, 05:48 PM #1
Anyone interested in a Triton Trolley (Brisbane Area)
I was going to put this in Market Place for $40 but it is Triton specific.
Anyone in the Brisbane who may be interested in a shop made Triton Trolley. I sold my Triton gear about 6 months ago but the purchaser didn't have room in his shed for the trolley (it was supposed to be sold as a unit...Triton gear & Trolley).
Here are some pics of the trolley at the present time.
IMG_0278.JPG IMG_0279.JPG IMG_0280.JPG
and here is a link to the trolley when I was trying to sell the whole unit....TRITON SALE
and here is a link to the trolley when it was a WIP and at it's prime
The trolley no longer has the 3 storage drawers at the end as I have utilised them elsewhere after ceasing using the Triton WC but the timber slides are still there for the drawers.
The design is for the legs to be removed from the WC and fits snugly onto the timber blocks on the trolley making it easy to lift the WC off if necessary. The hole in the upper shelf accommodates a Trtion Dust bag and allows the bag to rest on the lower shelf.
Once the WC is in place, the table top at the end is the correct height to use as an out feed table with sliding drawer under for storage and sufficient lip on the table for clamping if needed. If using a Sliding extension table, the fence on the sliding table glides over the WC top and also over the out feed table. (I had a Maxi table).
The trolley is wheeled and will fit into a standard trailer. It is not at it's prime as it was when I first made it 8 years ago but am only asking $40 .......otherwise it will be cut up as it takes up room in my shed.
PM me if interested
Cheers
Skot
-
11th January 2015, 11:49 PM #2
New Member
- Join Date
- Jan 2011
- Location
- Chapel Hill
- Posts
- 4
PM sent
Skot - just sent PM
Mark
-
12th January 2015, 08:45 AM #3
mnk,
I will check dimensions today and send them through
-
12th January 2015, 02:29 PM #4
-
12th January 2015, 06:21 PM #5
New Member
- Join Date
- Jan 2011
- Location
- Chapel Hill
- Posts
- 4
Skot
measurements - all good
Have sent message for details of collection / payment
Thanks
mark
-
13th January 2015, 04:03 PM #6
Trolley sold to mnk......hope it sees years of work with the new owner.
Cheers