![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
19th December 2014, 07:18 AM #1
11" rough cast back plates for sale.
Two as cast chuck back plates in iron to suit a Hamada lathe.
I did these years ago to suit the Hamada/Sagar wood lathe I was using to turn up to 8 foot diameter stuff.
Sold lathe years ago now clearing out the junk.
As I remember it was 11" American standard type. Short taper.
I'm not a machinist so this may not be correct.
Pics show weight and size.
Make me an offer (I'd love some old cast legs) or Al to fab some for the Ewheel.
H.image.jpgimage.jpgimage.jpgJimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
Rough cut/cast
By jane99 in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etcReplies: 0Last Post: 31st March 2004, 11:29 AM