![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Veneered mdf supplier needed
-
7th October 2014, 04:15 PM #1
GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 69
- Posts
- 736
Veneered mdf supplier needed
Now that Amarind has gone belly up I can't find a reasonably priced supply of veneered mdf for laser cutting. We used to pay about $170 for a 7mm sheet with aust red cedar veneer good both sides. Now the next supplier wants $450+ per sheet and we usually buy ten sheets at a time. We also buy 17mm sheets in red cedar, jarrah, tas oak and blackwood. Any advice gratefully followed up. If I can't find a reasonably priced supplier I will either have to start doing my own veneering or close the business. Len.
-
11th October 2014, 10:49 PM #2
Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 5,906
We use Timberwood Panels in Melbourne. They're one of the only people left in Oz.
They'll press any veneer or laminate on any substrate up to 3m long.
Pricing is pretty reasonable too ($38 per sq.m American Oak DGB on 18mm MDF)
-
12th October 2014, 05:43 PM #3
Intermediate Member
- Join Date
- Sep 2007
- Location
- Sydney
- Posts
- 32
-
15th October 2014, 07:55 PM #4
GOLD MEMBER
- Join Date
- Mar 2003
- Location
- Newcastle
- Age
- 69
- Posts
- 736
Thanks for the help there.