![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Finishing for outside use
-
6th September 2014, 03:46 PM #1
New Member
- Join Date
- Sep 2014
- Location
- Washington
- Posts
- 3
Finishing for outside use
I need to put a finish on a table I'm making to keep outside on our deck. What kind of a finish would I put on it to keep it from splitting and weathering?
-
6th September 2014, 06:52 PM #2
Options are, in order of increasing maintenance (and roughly their level of protection):
1) None at all. If it's a durable timber, this might work quite well.
2) Oil - needs to be reapplied roughly every year.
3) SolarGuard or similar, assuming you don't mind a painted table.
4) Varnish - takes time to apply, needs sanding and reapplication every 5 years or so.
5) Marine epoxy followed by varnish - even more time consuming, needs revarnishing every 5 years or so, but will provide the highest level of protection from the elements.
6) Marine epoxy followed by paint - less maintenance than 5) if you don't mind a painted finish.
-
6th September 2014, 07:16 PM #3
Senior Member
- Join Date
- Jun 2013
- Location
- Geelong
- Posts
- 87
Decking oil for mine, I use feast Watson as it is an oil not a water based decking "stain". Easiest way to tell if it's an oil base or water base is read the cleanup section oil base uses turps water base uses water clean up. You will need to redo it every 12 months or so.
this covers the weathering side as for the splitting I guess timber is timber and some is more prone to splitting.Anyhow I am no expert but it works for me, cheers
-
9th September 2014, 12:52 PM #4
The Livos lady
- Join Date
- Feb 2011
- Location
- Melbourne
- Posts
- 206
Exterior oil
It’s always good to use a safe finish on a table, whether it is inside or out. If you haven’t decided on a finish, a consideration would be the Livos Alis decking oil. It does come in a stain as this is what gives it the protection against weathering and the UV rays. With a full ingredient disclosure, you at least know what you are using. The nice thing with reapplication is it is a quick and simple one coat...there is no peeling or cracking of the coating so no sanding back required.
Livos Australia
<O</O
-
9th September 2014, 01:25 PM #5
Just a note. Don't know if anyone else noticed, but ianosgood010 is in Washington!! He may not be able to get products we are recommending.
Regards,
Rob
Similar Threads
-
Finishing a Cot
By James H in forum FINISHINGReplies: 0Last Post: 13th October 2012, 05:52 AM -
MDF Finishing
By QbnDusty in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 6Last Post: 16th October 2006, 10:38 PM