![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
18th November 2012, 12:18 AM #1
Novice
- Join Date
- Aug 2008
- Location
- queensland australia
- Posts
- 11
hafco tc 450 tool and cutter grinders
Could any one tell me where i could get a copy ( original or photo ( pay for cost of course )) of any printed matter that came with these machines when new such as instructions and set up procedures ect
cheers adrian
-
18th November 2012, 09:57 AM #2
SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Mallacoota,VIC,Australia
- Age
- 53
- Posts
- 653
HI
sgtfoxhound,
Welcome to the Forum for a start. I can Supply You with a Manual for the Machine. The Manual will be for a Hafco TC-450 which will also include a page from a DeeShin 450 Manual. The Extra Page is more so just a supplement that shows (only in the parts diagrams) the Movable Tailstock Set Up as a Rotary Workhead. The Pictures are not perfect, but they are quite visible and certainly a hell of an improvement over the pics in the DeeShin 450 Manual that I bought. Just for Interest I own a Herless BM-450 .
Please PM Me with Your Postal Address. In the meantime if I can find a way of Shrinking the PDF Files to Emailable size, I will just Email them.All The Beststeran50 Stewart
The shortest way to do many things is to do only one thing at once.
-
27th July 2014, 09:35 AM #3
New Member
- Join Date
- Jul 2014
- Location
- Adelaide South Australia
- Posts
- 2
Request for any info on the TC-450
Hi there - I noted in your reply that you have some information - is this available electronically.
If not can I get a copy and I'll post you the costs etc
regards
Steve
Adelaide