![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 10 of 10
Thread: wanted 2 step pulleys
-
9th July 2014, 03:32 PM #1
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
wanted 2 step pulleys
am after two step pulleys for lathe project,will pay postage if too far away ......thankyou in advance.................bob
-
9th July 2014, 06:46 PM #2
GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 2,956
What size diameters do the pulleys need to be, also what size shafts are they going on? This information will help getting the size required.
Kryn
-
9th July 2014, 08:07 PM #3
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
-
9th July 2014, 09:06 PM #4
Have a box with various sized pulleys in the shed, will have a look tomorrow to see if I have anything suitable for you.
Cheers
DJ
-
9th July 2014, 09:38 PM #5
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
-
12th July 2014, 09:22 AM #6
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
-
12th July 2014, 05:33 PM #7
-
12th July 2014, 06:15 PM #8
Not sure if they'd be at all suitable for what your doing but John Hiesz made some very nice ones on his you tube channel from ply the other day just google if your interested he comes up near the top.
-
12th July 2014, 08:00 PM #9
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
-
13th July 2014, 11:40 PM #10
human termite
- Join Date
- Jul 2007
- Location
- Nambour queensland
- Age
- 69
- Posts
- 327
i have got hold of two pulleys thanks ,could mods please close, thankyou.......bob