![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
-
12th July 2014, 02:01 PM #1
SENIOR MEMBER
- Join Date
- Oct 2012
- Location
- brisbane
- Posts
- 831
Dewalt DW1151 Combination Planer/Thicknesser
Woodworkers clean out. DeWalt DW1151 combinationplaner/thicknesser. This unit is in good condition but hasn’t been used for thelast 4 or 5 years which has caused the infeed and outfeed rollers to perish.These can quite easily be replaced. Apart from this the machine runs just fine.It has a 260mm cut and comes with the original instruction manual. Priced tosell at $250
This is not an auction. Just say I’ll take it and it’syours.
Pickup at Ascot in Brisbane.
-
12th July 2014, 11:08 PM #2
SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 741
Contact for recoating of feed rollers
For anybody interested in the thicknesser/jointer combo, but unsure where to get the feed rollers recoated - Qld Rollers and Liners at Rocklea (Ph 3277 8200) do this kind of work. I had them recoat my bandsaw wheels about 10 years ago. I have attached the link to their website below.
Rubber Rollers and Polyurethane Rollers and Liners
-
13th July 2014, 11:37 AM #3
Intermediate Member
- Join Date
- Nov 2012
- Location
- Kenmore, Brisbane
- Posts
- 40
Hi, I'll take it pending inspection if that is ok.
PM on the way.
Eamon
-
13th July 2014, 07:32 PM #4
SENIOR MEMBER
- Join Date
- Oct 2012
- Location
- brisbane
- Posts
- 831
SOLD
The dewalt is now sold