![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Clock work Kinetic sculpture's
-
22nd June 2014, 09:51 PM #1
Clock work Kinetic sculpture's
tonight i went mad on the google searches and came across a few utubes that show how the escapements work, i thought id share them
1st one shows an oscillating wheel setup http://www.youtube.com/watch?v=xxAyzC9e5_Y
2nd a roller replacing a pendulum http://www.youtube.com/watch?v=mTuchnK0yu4
those were his early works of art , one of his latest is http://www.youtube.com/watch?v=U-9CbRX9mHc
designs from the artist " David C Roy " , and found a few newer ones as well
his website is http://www.woodthatworks.com/blog/#.U6a1A_mSxnMhow come a 10mm peg dont fit in a 10mm hole
-
5th July 2014, 09:42 PM #2
Drawing
I knocked up a drawing ill be CNCing out of 10mm perspex to see if it works
kinetic2.jpg
there will be 2 wheels ( one in black one in blue ) with 2 sets of escapementshow come a 10mm peg dont fit in a 10mm hole
-
6th July 2014, 10:46 AM #3
Is it done yet?
I was mesmerized by David Roy's Monarch II.
-
8th July 2014, 12:55 PM #4
Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 694
Mind boggling motion!!
I will have one of each thank you!!