Thanks: 0
Likes: 6
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Spoon carving toolbox
-
3rd July 2014, 04:07 PM #1New Member
- Join Date
- Oct 2013
- Location
- Australia
- Posts
- 5
Spoon carving toolbox
photo 1.jpgphoto 2.jpg
My first woodwork / joinery project!
I'm learning with Richard Vaughan, and have never been so challenged and so pleased by any endeavour.
I made this little box to hold my spoon carving tools (and extra space, of course, for future purchases).
The carcass is Qld maple, as are the handle strips, whereas the fronts are Tassie oak. I handcut the joints, so you can tell what kind of day I was having by the look of each one.
I still have some polishing to do using a blonde button shellac, but she's come up all right. Thanks to Xanthorrhoeas for all the advice there!
-
3rd July 2014, 10:44 PM #2
Nice work . Envious of your first dovetails - I doubt that mine will be that tight looking when I eventually work up the courage to tackle some
-
4th July 2014, 01:40 AM #3
Really very nice !
Glenn Visca
-
4th July 2014, 08:55 PM #4
Kudos to Kozimoto, very nice.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.