Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2001
    Location
    Between a rock & a hard place (vic)
    Posts
    367

    Update on Timber Dust (yep more safety crap)

    Given the regular posts regarding dust extraction/respirators I thought some of you may be interested that the ACGIH (american government hygienists) has recently released revised US exposure standards and toxicity information for a couple of timbers.

    Birch, Mahogany, Teak and Walnut are now confirmed as “suspected human carcinogens” (i.e only some of the rats got cancer, lets kill some more).

    Oak and Beach (USA varieties I believe) are now “confirmed human carcinogens”.

    In addition the dust exposure standards have come down dramatically - i.e. no more than 0.5 mg/metre cubed of air for western red cedar dust.

    The softwood dust exposure standard has gone from 10mg dust down to 2mg per metre cubed. Hardwood dust remains at 1mg dust per metre cubed of air.

    What does all this mean ?
    Firstly, the more research the more we understand about just how toxic timber dusts are.

    Secondly, note that the measurements are in milligrams (mg) – exposures above the stated have proven to have ill effects.

    These are very small amounts that can be easily reached when using sanders, mitre saws, bench saws, etc.
    It reinforces the need to keep dust away from your head and the need to select, use and maintain a good respirator.


    [This message has been edited by Eastie (edited 06 May 2002).]

  2. #2
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,665

    Post

    Below is the first line from our BAD WOODS page. If you're a newby and haven't seen it maybe now is a good time to have a look.

    In Australia all wood dust is now classified as carcinogenic (liable to cause cancer) This list has been compiled to give woodworkers a little bit of an insight into the potential health hazards posed by some of the timbers that are used.
    Cheers - Neil

    KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
    Use the Report icon at the bottom of all Posts, PM's and Blog entries.


  3. #3
    Join Date
    Jun 2000
    Location
    Western Australia
    Age
    78
    Posts
    122
    Makes a good argument for hand tools...in regards to respiratory tract problems..something we need to be constntly aware of ....!

    Cheers

    ------------------
    Johnno
    Johnno

    Everyone has a photographic memory, some just don't have film.

  4. #4
    Join Date
    Jun 2000
    Location
    Auckland, New Zealand
    Posts
    0

    Question

    Bumb Question Time.

    I dont know the answer to this but... would the dust be illiminated or majorly reduced if some spray system was devised???

    Okay water may be more harmful - rust - electric shock etc but if some kind of moisture/dampening system was employed could this help.

    The reason I ask this is I saw some "Green wood" turning and even the sanding did not seem to produce any dust in the air.

    Any thoughts ???

    Sandy across the ditch

  5. #5
    Join Date
    Jul 2001
    Location
    South Australia
    Posts
    0

    Post

    If your sanding on a lathe and not making any dust you aint doing anything other than polishing.

    ------------------
    Some days I turns thisaway, somedays I turns thataway and other days I don't turn at all.
    Some days I turns thisaway, somedays I turns thataway and other days I don't give a stuff so I don't turn at all.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •