![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
8th April 2014, 06:00 PM #1
Is a solid core door really solid?
I am replacing an exterior door sized 2040 x 680 x 35. Just bought a Hume Duracote STPC door 2040 x 815 x 35 and described as solid core in Bunnies catalogue. The wooden edges on both vertical sides are 35mm square. I will need to reduce the width by 135mm.Can anyone tell me what I will find as an edge if I take 135mm off the width? Is it better to take it all off one side? Or 67mm off each side? mick
Read and reply to the full thread at RenovateForum.com....