![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Double ended tack remover
-
31st March 2014, 03:52 PM #1
New Member
- Join Date
- Mar 2014
- Location
- Shoalhaven
- Posts
- 1
Double ended tack remover
I am looking to replace my stolen double ended tack remover, I always called it the "jimmy". Don't know the brand and don't have a picture. Cast metal, (not flat bar), silver and between 250mm and 290mm in length. Had it for about 30 years and really would like to replace it as I need it for my work. If you have one or know somebody with one please contact me. Thanks, Mike
-
31st March 2014, 04:07 PM #2
GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,464
Not double ended, but it may be of interest.
http://www.ebay.com.au/itm/ITALIAN-M...item2c7f217157
-
31st March 2014, 05:13 PM #3
GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,700
I recently purchased one
It is a curse when someone nicks your favourite tools isn't it! I was recently looking to replace a single ended one with a wooden handle (lost in the flood, not stolen) and went to Bunnings here in Brisbane. They didn't have what I wanted but had two double ended ones including one that was cast or forged and sounds like the one that you describe. I'll take a photo and post it later. It was about $25 from memory.
Regards
David
-
31st March 2014, 08:59 PM #4
GOLD MEMBER
- Join Date
- Nov 2012
- Location
- Brisbane
- Posts
- 1,700
This is the item that I mentioned. I hope that ths helps. Regards, david
Tack remover 2.JPGTack remover 1.JPG