![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
Thread: Rosewood and crows ash
-
19th March 2014, 09:47 PM #1
Novice
- Join Date
- Aug 2013
- Location
- Casino
- Posts
- 12
Rosewood and crows ash
Rosewood, Teak (crows ash) - reclaimed
Rosewood (NSW- scented): three 155X50mm @3.5m. Former floor joist, nail holes top side about an inch in. $25lm
Crows Ash: Four 155X50mm @3.5m. Nail holes top side about an inch in. $24lm; two 100x70mm boards (4m and 3m bearers with few nails) @$30lm; some 100x70mm nail free blanks in lengths of 400m @ $15 each, two 190mmx20mm boards (4m and 3m) @$15lm. I am open to offers if buying larger volumes.
Timber can be view most weekends or late afternoons. I’m 2.4hr from Brisbane, 20min west of Lismore.
If you want a larger volume I can deliver to the Brisbane area at a very fair rate. I have to travel that way for in the coming weeks.
All this timber was used as structural timber and has nail holes etc. Given that it is recycled timber I would prefer pick up so buyers can be sure they are satisfied with items description.
-
22nd March 2014, 06:22 PM #2
Novice
- Join Date
- Aug 2013
- Location
- Casino
- Posts
- 12
Mailing option
I will cut the top inch of the 6x2 and cut these longer lengths into shorter section
if that suits a buyer. If you would like some of this timber cut down into hole free boards and DAR then PM me with a size request and price offer.