Where to find hardware?

[Michael G]

G'day Guys
Just popped over from the metal work forum to ask a question. I spent most of the afternoon making up a set of drawers for some tools and I must admit they have turned out better than I thought they would. But - I need to find some drawer pulls for them. This is where I always get stuck. The drawers in this case are 35mm high and because it is a tool box I don't want something that protrudes more than say 20mm. Does anyone have a good source for spring loaded or retracting drawer pulls (or even a fixed low profile unit)?
Looking around on the web, everything seems to have a large escutcheon plate behind it so that the mounting surface needs to be around 50mm high at a minimum.
Thanks, Michael

[ian]

because I have the LV site set as my home page links to options available from Lee Valley


http://www.leevalley.com/en/Hardware...806,43565&ap=1


recessed pulls?

http://www.leevalley.com/en/Hardware...427,55265&ap=1



plate pulls?

http://www.leevalley.com/en/Hardware...521,43557&ap=2


small knobs?

http://www.leevalley.com/en/Hardware...005,50468&ap=1

[Michael G]

Thanks Ian. The knobs might work for me. Everything else seems to be too big to fit the space available.

Michael

[ian]

Thanks Ian. The knobs might work for me. Everything else seems to be too big to fit the space available.

Michael

hi Michael

you should be able to source suitable knobs in AUS.

[ian]

these might be a little harder to find in AUS -- though maybe just right for a tool box

tool knobs.jpg

[goodwoody]

Goods and Chatells in Bris. Great service. You can download their catalogue in pdf format. Damien.