![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Recycling... Why'd ya do that?
-
28th February 2014, 03:06 PM #1
Recycling... Why'd ya do that?
I've been going through some old photo's and come across this 3. They are pics of the side rail from an 18th century French bed. These were part of a beautifully carved bed which was cannibalised for the French walnut to be used in the restoration of an 18th Century French dresser (from memory). French beds of that period were almost 1 foot shorter than those of today so the side rails were often used for their timber.
Pic 1: Pauline feeding the carved walnut side rail into thicknesser.
Walnut 1.jpg
Pic 2: Denuded French walnut emerging from the thicknesser.
Walnut 2.jpg
Pic 3: Ya big girls blouse, It's just a piece of wood.
Walnut 3.jpg
We put a lot of old pieces of furniture through the thicknesser over the years to salvage timber from the same era trying to keep restorations as faithful as possible to the time they were originally made.
Often it was almost heart breaking to see fine carved work go this way. Recycling in it's truest form.
-
28th February 2014, 03:16 PM #2
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Jeez it looks like the machinery and workshop are also from the 18th centuary as well.
Experienced in removing the tree from the furniture
-
28th February 2014, 04:59 PM #3
Close late 18th early 20 century. T'was in the grain & feed store just up the road form our workshop in Newstead. No way to fit my 36"thicknesser and panel saw in where we were and no 3 phase power so free use of someone elses was a good option. Sharpened and set the blades from time to time and never had to pay for the use of that thicknesser.
-
28th February 2014, 05:05 PM #4
I don't know where to look ...... the timber or the double denim
Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
Similar Threads
-
Recycling
By artme in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 8Last Post: 15th February 2014, 09:29 PM -
Recycling?????
By Iain in forum JOKESReplies: 0Last Post: 15th January 2006, 06:35 AM -
Recycling
By Tikki in forum JOKESReplies: 0Last Post: 3rd November 2005, 07:30 PM