![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: 3D horse to 2D and cut out
-
26th February 2014, 01:31 PM #1
Senior Member
- Join Date
- Sep 2012
- Location
- ont Canada
- Posts
- 399
3D horse to 2D and cut out
Found a 3d horse file and after much work I was able to convert each piece to a *.dxf file format and cut it on the laser.
This particular file was very troublesome, (and very large like 300in x 500 in ,it was probably metric )i have done many of these but it was never a lot of editting as this was.
Its not perfect but ok.
I like these files, i like the 3d to 2d and back to 3d
http://youtu.be/1LX_7Zx0pJQ