Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default Painting black coated formply

    Can anyone please advise on how to paint black coated form ply with an oil based paint for putdoor use?

    I have epoxied the exposed bare ply edges, and now want to paint the whole thing.
    regards,

    Dengy

  2. #2
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default

    If it's the phenolic covered stuff, forget it!
    The only way I could get anything to stick was to remove the phenolic/black coating which makes using the formply a bit of a waste.

  3. #3
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    355

    Default

    Experienced in removing the tree from the furniture

  4. #4
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    I thought we had already been down this road.

    https://www.woodworkforums.com/showthread.php?t=180557

  5. #5
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    Thanks Bob, I had forgotten all about this thread. After reading the responses before, I must have put it in the too hard basket, and now the need to do this has arisen again.

    My apologies, another seniors moment
    regards,

    Dengy

  6. #6
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    Not a problem.

    Hope you get it sorted satisfactorily.

  7. #7
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    0

    Default

    As people have mentioned the phenolic coating is a problem...it is intended to stop stuff sticking to the ply.

    All is not lost.
    A random orbit sander loaded with 120 gritt will get you there...but you will need plenty of disks, because this stuff is hard.

    Depending on where the form ply has come from the coating will vary.
    The Australian made form ply from a few years ago, had a pretty thick coating and realy took some getting thru, some of the stuff we are seeing comming out of asia the coating is pretty half hearted and not as much work.

    As far as "getting a key" even a good scratch pattern on this stuff will not guarantee good long term adhesion, particularly with lower order primers.

    You need to keep sanding till you are thru most of it and you are seeing only remnants in the grain.

    Personally Id be using a thinners bassed primer like "wattyl super etch"....it is my "go to primer", because it sticks to lots of things better than other primers.

    Yes I know its a spraying primer, but I'd be putting the first coat on with a brush and rub it in hard....yes you need to work fast.

    light sand to flaten the surface and second coat sprayed would be my choice.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •