Results 1 to 10 of 10
Thread: Introducing brit from brissie
-
13th February 2014, 10:12 AM #1Member
- Join Date
- May 2012
- Location
- brisbane
- Posts
- 23
Introducing brit from brissie
G/day from Brit in Brissie
I am 63 and a retired plumbing contractor who has now entered the fascinating and frustrating world of woodworking.Whilst trying to teach myself the computer i discovered utube and fine woodworking and now finding myself totally addicted to anything involving wood shavings or dust or finishes.Ihave been a very keen golfer but this has been replaced by my table saw. The thing i find most confusing is the computer and i seem very slow in learning and understanding all the terminology so i don't know if i will be able to post photos and use the system as much as i would like but i will try.
Ihave to say since i have entered the world of woodworking i have only encountered helpful and friendly people.
-
13th February 2014, 10:26 AM #2I have to say since i have entered the world of woodworking i have only encountered helpful and friendly people.
-
13th February 2014, 11:05 AM #3
Welcome Brit from Brissie
I am sure you are going to enjoy being a part of the forums, and do not let that computer stuff hold you back I'm sure given a little time you will learn to master that too !! but plenty of people around here to help you out if you get stuck. You only have to ask around here and someone will be sure to help.
Once again welcome and I look forward to seeing some photos of your work along the way. That is once you master that damn computer
Cheers
Tony.
-
13th February 2014, 01:35 PM #4
Welcome aboard Brit, where abouts in Brizzy are you?
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
13th February 2014, 05:00 PM #5
G'Day & Welcome to a top forum "young Brit".
There are a heap of members in Brisbane and across S.E. Queensland.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork...
Cheers crowie
-
13th February 2014, 05:59 PM #6Member
- Join Date
- May 2012
- Location
- brisbane
- Posts
- 23
-
13th February 2014, 06:28 PM #7
Jugs always on at mine too, good to catch up and have a chat about all things wood )
Cheers
Tony.
-
13th February 2014, 06:56 PM #8GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Brit.
-
13th February 2014, 10:22 PM #9
Welcome brit. Between your woodwork and these forums, there won't be many free hours in your day. Enjoy your retirement.
This might help when you get around to wanting to add some photos to your posts.Dallas
-
14th February 2014, 03:20 PM #10
Welcome to the forum. Not always advisable to publicize your phone number on an open forum. You can send him a PM(Private Message) by clicking on the member name.
Similar Threads
-
G'Day from Brissie
By webcraft in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 16th April 2010, 12:13 AM -
flooding in Brissie
By mic-d in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 31Last Post: 31st May 2009, 11:30 AM
Bookmarks