Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2014
    Location
    Brunswick
    Posts
    2

    Default Hardwood table staining and finishing advice

    Hi guys,

    First posting on the forum after trawling through all the posts, so go easy on me!

    I have a 10 year old dinning table that appears to be a dark hardwood (see images) which I would like to restore.

    Have been doing a bit of research on this and was in at Bunnings and Masters today.

    So the plan is to completely strip the table down, sand, and then stain and finish.

    What I need some advice on, is the best materials to strip down the old finish with and the stain and finishing options.

    The table will have to live in an outside deck whilst I work on it and moved in an out as required from the open as it is too big to move otherwise. Thinking I have 4 days. 1 to strip, 1 to sand, 1 to stain and 1 to finish.

    Overall, I want a semi gloss/matt finish the will be very durable and not mark easily.

    1. Striping down - what are the best proven stain/paint strippers for hardwood tables and what is the process? Today I saw a variety of stuff in retail land all claiming to be the best!

    2. Stain - water based vs non water based? Which will be the most durable? The table will live in a hot upstairs room and get a lot of sun.

    What is the Wattyl Traditional Craftsman stain like? Are the stains sold in Masters and Bunnings ok, or can I get some professional grade material somewhere else?

    3. Finishing -I was going to finish things off with a few coats of Danish Oil or simply try and find a few cans of spray on clear lacquer. Thoughts? Suggestions here?

    4.Application - I don't have spray gear. I was wanting to use a roller (for the stain) or a large sponge applicator. Ideas on this? Also, what is the finish like with Danish Oil or lacquer if a cloth is used? - Should I be going aerosol cans if I want a nicer finish?

    Thanks in advance!

    John.
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Hi John and welcome,

    I'm not sure that the table is dark hardwood, but that will be resolved when you begin preparing it for it's next incarnation. What tools do you have at your disposal for stripping back and final prep of the table?
    I think t would be a good idea to get an inkling of what you are dealing with before plunging headlong into a full strip of the surface. It would important to ensure that you are not working with a veneer rather than solid wood.
    Perhaps sand back just a small section of the table top (or possibly the under side of the top) to ascertain what you are actually working with.
    You may find that after stripping and prepping, you don't need or won't want a stain on it. Then you have other options for finishing the table which you might consider.

    Regards,

    Rob

  3. #3
    Join Date
    Jan 2014
    Location
    Brunswick
    Posts
    2

    Default

    Quote Originally Posted by LGS View Post
    Hi John and welcome,

    I'm not sure that the table is dark hardwood, but that will be resolved when you begin preparing it for it's next incarnation. What tools do you have at your disposal for stripping back and final prep of the table?
    I think t would be a good idea to get an inkling of what you are dealing with before plunging headlong into a full strip of the surface. It would important to ensure that you are not working with a veneer rather than solid wood.
    Perhaps sand back just a small section of the table top (or possibly the under side of the top) to ascertain what you are actually working with.
    You may find that after stripping and prepping, you don't need or won't want a stain on it. Then you have other options for finishing the table which you might consider.

    Regards,

    Rob
    Hi Rob,

    definitely not a laminate - see some more photos attached.

    In terms of equipment, I have a really good Ryobi sander and some rollers.

    The table will need to match the chairs so definitely needs to be stained again.

    John.
    Attached Images Attached Images

  4. #4
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Hi,
    OK, so that's a good thing. Is the stain covered with anything other than, say, a polyurethane? If not, I'd suggest you start sanding. You shouldn't need any stripper. What kind of sander do you have. Is the Ryobi a belt, orbital or random orbital unit. Also, what grits do you have available for use.

    I would imagine you could start with about 80-100 grit and then 150, 180, 240 and 400. This will ultimately depend on what type the sander is. 400g is the coarsest grit I would stop at. This will lead into a good finish with the new stain. If you want to go higher, probably not much more than 500 grit

    As far as finishing the table after staining, I'd recommend Minwax Wipe On Poly (satin). You can get this at Bunnings. Use a clean cotton rag to wipe on the first coat and sand lightly when it's dry. The repeat the process twice more. Finally, add the last coat. Should look beautiful.

    Regards,

    Rob

  5. #5
    Join Date
    Oct 2003
    Location
    Canberra
    Age
    48
    Posts
    318

    Default

    Without trying to discourage you, I reckon you'd find it heaps easier to simply touch up the dings etc rather than trying to restain the whole thing. Matching stains is something that I find hard to do. It looks good on a test piece, but then when you do the whole thing, it looks quite different.

    Either way, good luck.

    Trav
    Some days we are the flies; some days we are the windscreen

Similar Threads

  1. Advice needed on staining and finishing
    By Mitch3 in forum FINISHING
    Replies: 10
    Last Post: 11th August 2012, 10:50 PM
  2. Old Oregon (I think) door > Table Top - Finishing Advice?
    By Lucas Formosa in forum FINISHING
    Replies: 2
    Last Post: 29th November 2011, 10:05 AM
  3. Staining / finishing Vic Ash wardrobes
    By Tigerben in forum FINISHING
    Replies: 2
    Last Post: 24th November 2007, 07:08 PM
  4. Finishing/staining/varnishing a bookshelf
    By bresmith in forum FINISHING
    Replies: 4
    Last Post: 18th September 2007, 03:44 PM
  5. Staining and Finishing
    By boxers in forum FINISHING
    Replies: 2
    Last Post: 19th August 2005, 12:09 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •