Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17
  1. #16
    Join Date
    Feb 2012
    Location
    Northern beaches, Sydney
    Posts
    6

    Default Organoil Interior Clear Finishing Oil

    I found I have a can of Organoil's Interior Clear Finishing Oil - it must be a few years old, since it lists the address of Organoil as Byron Bay. It contains tung oil and burnishing is one of the suggested methods of application - is this an earlier name for the Hard Burnishing Oil?

  2. #17
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Hi Munin,

    I'm not really sure, but if it's Tung Oil, it should work, particularly if burnishing is suggested. If you can, I suggest you go through all the grits I have suggested after oiling, as I think these are needed to ensure sufficient heat on the oiled surface to ensure adequate burnishing.
    Please do try it on a sample first and if you have any problems with it, let me know and we'll solve them.

    Regards,

    Rob

Similar Threads

  1. Wipe on Poly
    By har7801 in forum FINISHING
    Replies: 8
    Last Post: 27th May 2010, 03:19 AM
  2. Getting The Most Out Of Wipe-on Poly
    By DPB in forum FINISHING
    Replies: 7
    Last Post: 7th May 2006, 08:40 PM
  3. Wipe on Poly
    By Lignum in forum FINISHING
    Replies: 0
    Last Post: 26th February 2006, 06:43 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •