Results 16 to 17 of 17
Thread: Wipe-on poly on alpine ash table
-
21st January 2014, 10:24 PM #16Novice
- Join Date
- Feb 2012
- Location
- Northern beaches, Sydney
- Posts
- 6
Organoil Interior Clear Finishing Oil
I found I have a can of Organoil's Interior Clear Finishing Oil - it must be a few years old, since it lists the address of Organoil as Byron Bay. It contains tung oil and burnishing is one of the suggested methods of application - is this an earlier name for the Hard Burnishing Oil?
-
21st January 2014, 11:41 PM #17
Hi Munin,
I'm not really sure, but if it's Tung Oil, it should work, particularly if burnishing is suggested. If you can, I suggest you go through all the grits I have suggested after oiling, as I think these are needed to ensure sufficient heat on the oiled surface to ensure adequate burnishing.
Please do try it on a sample first and if you have any problems with it, let me know and we'll solve them.
Regards,
Rob
Similar Threads
-
Wipe on Poly
By har7801 in forum FINISHINGReplies: 8Last Post: 27th May 2010, 03:19 AM -
Getting The Most Out Of Wipe-on Poly
By DPB in forum FINISHINGReplies: 7Last Post: 7th May 2006, 08:40 PM -
Wipe on Poly
By Lignum in forum FINISHINGReplies: 0Last Post: 26th February 2006, 06:43 PM
Bookmarks