Thanks: 0
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
11th January 2014, 12:52 AM #1SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Perth
- Age
- 50
- Posts
- 197
What accuracy do I require with this dial indicator?
Ok guys, my dial indicators have arrived from amazon and at $15 each they look to be of great quality and have a lifetime warranty.
The only thing is they use Imperial Measurements and not Metric but I knew this before buying them.
What is an acceptable tolerance from the front to the back of a 12" blade and say the tolerance over the distance of the fence?
Also I have a digital caliper and if I do a test rip cut say and the piece is approx 50cm long, what tolerances are acceptable in woodworking with the width of the rip etc?
Cheers guys
Arry
-
12th January 2014, 01:31 PM #2SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Perth
- Age
- 50
- Posts
- 197
no-one
-
12th January 2014, 01:59 PM #3
Hi Arry.
Did a quick google search and found this link. Hope the link works.
Is this any help.
Table Saw Basics - Alignment - NewWoodworker.com LLC
Steven.
-
12th January 2014, 03:11 PM #4SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Perth
- Age
- 50
- Posts
- 197
Thanks heaps, having a read now.........
Exactly what I wanted, perfect!
Thanks heaps mate )