![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Hello
-
9th January 2014, 08:36 AM #1
New Member
- Join Date
- Jan 2014
- Location
- Morecambe UK
- Posts
- 1
Hello
Hi all I'm new here Ive had a schepach prima HM1 about 25 years, I haven't used it for at least ten years, when I put some timber through the thickneser all the rubber on the rollers have perished and fell off, Question can you get rollers for this model now, and if so where from
-
9th January 2014, 04:54 PM #2
G'Day & Welcome to the Great Southern Land and to a top forum "Mich".
There are quite a few members across the UK, Europe and the rest of the world.....
It's great to see the younger generation interested in working with & creating with timber
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork..
Cheers from On Top DownUnder, crowie
PS - I'd suggest you ask that sort of specific question in a couple of the different sub-sections for a wider amount of readers...
GENERAL & SMALL MACHINERY
HAND TOOLS - POWERED
ANTIQUE AND COLLECTABLE TOOLS AND MACHINES
-
9th January 2014, 05:22 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Mich.
-
9th January 2014, 05:46 PM #4
Welcome to the forum.
As Crowie has mention three sub-section to seek advise in regards to your machine and roller. Take a look at all three section before selecting one to post in.
-
9th January 2014, 08:21 PM #5
Welcome Mich,
As the others have said have a good look around, you will find sections of the forum for most questions you may have but to be sure you get a quick response and appropriate answer best to ask them in the right sections
The links Crowie has posted should be of great help to you
Cheers
Tony.
-
11th January 2014, 08:14 AM #6
welcome aboard
-
11th January 2014, 08:20 PM #7
Gidday & welcome aboard Mich, may your stay with us be a pleasant one.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.