Thanks: 0
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: New to forum
-
29th December 2013, 01:34 PM #1
New Member
- Join Date
- Dec 2013
- Location
- Brisbane
- Posts
- 1
New to forum
Hey Everybody
New to the woodwork scene. Started on a project involving Red Gum, the finishing is my concern as I want a smooth shop like finish still a long way to go before I get there
.
-
29th December 2013, 02:50 PM #2
GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Shailer Park Brisbane Southside
- Age
- 63
- Posts
- 0
Hi & Welcome to the Woodwork Forums, All the information you will be looking for I sure will be found within
Originally Posted by Jns001
Hey Everybody
New to the woodwork scene. Started on a project involving Red Gum, the finishing is my concern as I want a smooth shop like finish still a long way to go before I get there.
if you get stuck trying to find something or just have a straight out question feel free to ask away and Im sure you will get an answer pretty quickly. Lots of good and very knowledgeable people to be found on here 
Cheers & Good Luck with your project.
Tony
-
29th December 2013, 04:43 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
29th December 2013, 07:07 PM #4
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
G'Day & Welcome to a top forum "JNS".
There are a heap of members in and around Brisbane.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork..
Cheers crowie
-
31st December 2013, 08:19 AM #5
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,889
Welcome to the forum.
-
31st December 2013, 03:04 PM #6
Mildly Moderate
- Join Date
- Nov 2007
- Location
- Albury Well Just Outside
- Posts
- 2,966
Welcome to the forum.
You might want to take a look in this section of the forum. FINISHING & RESTORATION Feel free to ask questions.
To get you on your way and to give a general answer to your question sanding through the grits with the grain will give you a starting point to get a smooth finish.
-
31st December 2013, 03:20 PM #7
Member
- Join Date
- Apr 2012
- Location
- Perth hills
- Posts
- 10
Welcome to the forum
Reply With Quote
Similar Threads
-
YAY for this forum
By buzzy in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 6Last Post: 7th April 2010, 09:18 PM
