![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Thinning Canned Poly Clear
-
10th December 2013, 12:41 PM #1
Senior Member
- Join Date
- Aug 2013
- Location
- melb
- Posts
- 136
Thinning Canned Poly Clear
What is better to thin can of Poly clear? Meth spirits or canned thinners at bunnings?
What % for better smooth brush finish? I read start off at 25%.
What % for a spray gun? I have no idea.
Does the thinning reduce the gloss much? Spary poly cans don't have any gloss compared to the can.
One final slightly off Q, does poly clear cure faster in heat? Like setting it in 50degrees C for half a day.
Thanks.
-
11th December 2013, 02:39 PM #2
SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 80
- Posts
- 36
What do the instructions on the can say??
-
11th December 2013, 06:57 PM #3
I think it says to thin with turps.
Similar Threads
-
Canned petrol
By Bushmiller in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 24Last Post: 22nd September 2012, 04:03 PM -
how do you tint clear poly?
By a_macca in forum FINISHINGReplies: 5Last Post: 11th January 2011, 05:54 PM -
Perfect finish sought using Poly Clear
By JB in forum FINISHINGReplies: 4Last Post: 22nd October 2008, 08:11 AM -
Tradies transport canned?
By bennylaird in forum JOKESReplies: 1Last Post: 7th December 2005, 11:48 AM -
1:) Danish with poly and 2:) Poly over white/hard shellac ?
By barryr in forum FINISHINGReplies: 6Last Post: 6th August 2005, 02:11 PM