Results 1 to 7 of 7

Thread: Jafo :)

  1. #1
    Join Date
    Nov 2013
    Location
    Brisbane/Redcliffe
    Posts
    3

    Default Jafo :)

    G'day all, My name's Mick. I'm reasonably new to all this turning stuff and to date haven't done much more than a shaving brush in a bit of off cut timber just to see if I could, and a few fipple blocks for whistles made out of electrical conduit. The blocks were turned down to size from a length of Delrin rod. So as you see I don't have a great deal of experience, and now I find myself in woes with my old lathe, which is the reason why I came here in the first place. I need help sourcing a part for my lathe. Where should I post these sort of questions? Thanks for any help you can provide.


    Mick

  2. #2
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum Mick.

  3. #3
    Join Date
    Jan 2011
    Location
    Ormeau, Gold Coast, Australia
    Posts
    203

    Default

    Gidday & welcome aboard Mick, may your journey with us be a pleasant one.
    Regards Rumnut.

    SimplyWoodwork
    Qld. Australia.

  4. #4
    Join Date
    Nov 2013
    Location
    Brisbane/Redcliffe
    Posts
    3

    Default

    Thanks for the welcome Gents. I've been looking around for a section here to post up my lathe problem, to seek out help, but I'm not sure where I should post it. So I think the small machinery section might be the best area. I'll try there anyway. Thanks again for the welcome.


    Mick

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to the forum

  6. #6
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Mick".
    There are quite a few members in and around Brisbane & SE Queensland.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork..
    Cheers crowie

    PS - It's best to ask the specific question in a number of sub-section to great a wider audience...
    GENERAL & SMALL MACHINERY
    WOODWORK - GENERAL
    HAND TOOLS - POWERED
    WOODWORK - GENERAL
    WOODTURNING - GENERAL

  7. #7
    Join Date
    Nov 2013
    Location
    Brisbane/Redcliffe
    Posts
    3

    Default

    Quote Originally Posted by crowie View Post
    G'Day & Welcome to a top forum "Mick".
    There are quite a few members in and around Brisbane & SE Queensland.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork..
    Cheers crowie

    PS - It's best to ask the specific question in a number of sub-section to great a wider audience...
    GENERAL & SMALL MACHINERY
    WOODWORK - GENERAL
    HAND TOOLS - POWERED
    WOODWORK - GENERAL
    WOODTURNING - GENERAL

    Thanks mate. Seems that it doesn't want me to make the post I need to make with photo's. I'm having no end of technical glitches with he forum. Probably user error, but a pain in the behind none the less.
    What I need to find out is where to get a replacement rear bearing for Remag WL 800. Any ideas?


    Mick

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •