Thanks Thanks:  0
Likes Likes:  4
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    2,464

    Default Cleaning Silicone

    I did a quick search and found nothing pertinent, although I am sure it has been mentioned previously.

    I have silicone on the bathroom floor tiles and SWMBO is not impressed. I tried cleaning it with methylated spirits to no avail.

    What can I use? Acetone perhaps? Any help would be appreciated.

  2. #2
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    9,605

    Default

    One of the quickest ways to turn silicone to jelly is attacking it with petrol, but I'm guessing turps will work as well.

  3. #3
    Join Date
    Jan 2007
    Location
    Grange, Brisbane
    Age
    53
    Posts
    929

    Default

    I bought "Silicon Remover" from Bunnings. Not sure what's in it but it worked. Turned the silicone to jelly which you scrape off. Took a few goes to get it all, but it got it in the end.
    Cheers, Richard

    "... work to a standard rather than a deadline ..." Ticky, forum member.

  4. #4
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    85
    Posts
    2,103

    Default

    My first thought was Mineral Turps but perhaps you should check on the cartridge as they usually have some mention of clean up method.
    Tom

    "It's good enough" is low aim

  5. #5
    Join Date
    Mar 2007
    Location
    Adelaide South Australia
    Posts
    397

    Default silicone removal

    I also used the bunnings product to clean up and separate class to a fish tank and altho it took time with several applications to penetrate the thicker sections it did work.
    Don't force it, use a bigger hammer.

    Timber is what you use. Wood is what you burn.

  6. #6
    Join Date
    Dec 2010
    Location
    Mornington Peninsula
    Posts
    2,464

    Default

    Just an update. I went to Bunnings and had a look at acetone and also the silicone cleaner, and thought that they may be a bit severe on the tiles. The last thing that I want is to make SWMBO unhappy by damaging the tiles.

    So I tried petrol with good results, and also mineral turps. I washed over the area afterwards with methylated spirits to remove some of the oiliness and smell.

    Whilst I still have some marks to come off, it appears to be that the best results are with petrol. Thought that this may help some.

  7. #7
    Join Date
    Jan 2002
    Location
    Melbourne, Aus.
    Age
    71
    Posts
    0

    Default

    If you've got a bead say at a 90 degree join the easiest way to remove it IME is to undercut it with a razor blade and then peel it off.

    Might work for smears on a tile if that was the problem too, but take care not to chip out the glaze.
    Cheers, Ern

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •